Difference between revisions of "WaterSip"

From gfi
Jump to: navigation, search
(Input file options)
(Parameter set Flexpart)
Line 309: Line 309:
  
 
====Parameter set Flexpart====
 
====Parameter set Flexpart====
 +
 +
- '''inputFormat (integer):''' file format of FLEXPART particle position output files. 0: regional long output format, 1: global analysis data output format, 2: regional short format, 3: global reanalysis data short format
  
 
<code>inputFormat = 3</code>
 
<code>inputFormat = 3</code>
 +
 +
- '''maxPart (integer):''' number of particles contained in a single FLEXPART partposit or shortposit file
  
 
<code>maxPart = 5000000</code>
 
<code>maxPart = 5000000</code>
 +
 +
- '''partMass (float):''' atmospheric mass represented by each particle in kilogramms. Parameter is written out by specific version of FLEXPART to create WaterSip output data.
  
 
<code>partMass = 1.01943e+12</code>
 
<code>partMass = 1.01943e+12</code>
 +
 +
- '''partStride (integer):''' number of particles to skip during processing to speed up calculations (1: use every particle, >=2: use every 2nd particle, etc).
  
 
<code>partStride = 10</code>
 
<code>partStride = 10</code>
 +
 +
- '''allowReenter (boolean):''' needs to be enabled for global simulations, and disabled for regional domain-filling runs to avoid double accounting of air parcels (0: disabled, 1: enabled).
  
 
<code>allowReenter = 1</code>
 
<code>allowReenter = 1</code>
 
  
 
===Full example for a FLEXPART run input file:===
 
===Full example for a FLEXPART run input file:===

Revision as of 17:17, 8 November 2016

About WaterSip

WaterSip is a diagnostic software tool that identifies source, transport and arrival properties of atmospheric water vapour. It implements the moisture source diagnostic of Sodemann et al. (2008) for input data from either FLEXPART particle output or Lagranto trajectories.

Input file options

The WaterSip input file is a text file with options that are specified for different option groups. Option groups are identified by square brackets (e.g. [Case]). There are 7 option groups which can appear in random order in the input file:

  • Case: general settings related to the case to be extracted
  • Grids: specification of different output grids
  • Diagnostrics: parameters of the moisture diagnostic
  • Output: general output settings
  • Variables: selection of output variables
  • Flexpart: options specific to runs using FLEXPART particle output
  • Lagranto: options specific to runs using Lagranto trajectories

Parameter set Case

- caseName (string): identifier for the run, prepended to all output files

caseName = global_201002_final_relativex

- inputDir (string): search path of the input files. The inputDir string ends with a placeholder for the files to be read in. For FLEXPART this will be either shortposit_ or partposit_. For Lagranto this will commonly be lsl_. The %s placeholder is completed by the currently read in date at runtime.

inputDir = /Volumes/Data/global/shortposit_%s

- outputDir (string): path where the output files will be created.

outputDir = /Volumes/Data/global/output/

- startDate (date string): inital date of the run, fixed format YYYYMMDD-HHMMSS. Start date is latest date of the run which moves backward in time.

startDate = 20100228-180000

- endDate (date string): final date of the run, fixed format YYYYMMDD-HHMMSS. End date is earliest date of the run.

endDate = 20100211-000000

- timeStep (integer): time step in hours between particles or trajectory output times. (typical values 6, 3, or 1 (hours))

timeStep = 6

- trajPoints (integer): number of trajectory points to be considered in a trajectory. For 5-day trajectories with a 6 hour time step, 5x4+1=21 trajPoints should be selected.

trajPoints = 21

- minTrajPoints (integer): minimum length of trajectories to be included in analysis. Parameter is only relevant for Lagranto simulations with uneven trajectory length.

minTrajPoints = 0

- sectorizeRegion (integer): region set used to divide moisture sources into different sectors (see Sectorization)

sectorizeRegion = 0

- filterBoxFile (string): path to the text file describing geographic boxes used to filter air parcels during transport (see Box filters).

filterBoxFile = /home/hso039/progs/WaterSip_tool/BOX_FILTERS_SiebenHengste

- filterIndex (integer): used line from the filterBoxFile to select/deselect trajectories

filterIndex = -1

- orographyFile (string): path to the orography file used to select arrival based on underying topography, using the ETOPO2 topography. File in netcdf format.

orographyFile = "/Users/hso039/Library/Mobile Documents/com~apple~CloudDocs/WaterSip_tool/etopo5.nc"

- lsmFile (string): path to the file with global land-sea-mask, currently from ERA-Interim data. Domain must be global but is in principle arbitrary. File in netcdf format.

lsmFile = "/Users/hso039/Library/Mobile Documents/com~apple~CloudDocs/WaterSip_tool/ERA_sea_mask_inv.nc"

- maskFile (string): path to file with an arrival selection

maskFile = " "

- useMask (boolean): use mask file (0=no, 1=yes).

useMask = 0

- ompThreads (integer): number of threads to be used with OpenMP parallelisation if compiled with flag -fopenmp (1=no parallelisation, >1 parallelisation activated.)

ompThreads = 1

- showStats (boolean): print statistics about particle processing to the command line (0=off, 1=on).

showStats = 0

Parameter set Grids

- arrivalGridMinLon (float): minimum longitude of arrival (target region) grid box. Trajectories are traced backward from the arrival grid. Integrated source, transport and arrival parameters are put on the arrival grid, weighted by precipitation or water vapour of arriving air parcels.

arrivalGridMinLon = -180

- arrivalGridMaxLon (float): maximum longitude of arrival (target region) grid box

arrivalGridMaxLon = 180

- arrivalGridMinLat (float): minimum latitude of arrival (target region) grid box

arrivalGridMinLat = -90

- arrivalGridMaxLat (float): minimum latitude of arrival (target region) grid box

arrivalGridMaxLat = 90

- arrivalGridDx (float): longitude increment of arrival (target region) grid

arrivalGridDx = 1

- arrivalGridDy (float): latitude increment of arrival (target region) grid

arrivalGridDy = 1

- arrivalGridRadius (float): gridding radius for information from arriving trajectories

arrivalGridRadius = 200

- sourceGridMinLon (float): minimum longitude of moisture source grid box

sourceGridMinLon = -180

- sourceGridMaxLon (float): maximum longitude of moisture source grid box

sourceGridMaxLon = 180

- sourceGridMinLat (float): minimum latitude of moisture source grid box

sourceGridMinLat = -90

- sourceGridMaxLat (float): maximum latitude of moisture source grid box

sourceGridMaxLat = 90

- sourceGridDx (float): longitude increment of moisture source grid box

sourceGridDx = 1

- sourceGridDy (float): latitude increment of moisture source grid box

sourceGridDy = 1

- sourceGridRadius (float): longitude increment of moisture source grid box

sourceGridRadius = 200

- griddingType (integer): select gridding algorithm (1: fast and simple gridding, 2: improved but slower gridding)

griddingType = 2

Parameter set Diagnostics

- uptakeThreshold (float):

uptakeThreshold = 0.05

- precipThreshold (float):

precipThreshold = 0.05

- blhScale (float):

blhScale = 1.5

- arrivalPrecipMin (float):

arrivalPrecipMin = 0.05

- arrivalPrecipMax (float):

arrivalPrecipMax = 1.0

- arrivalRHMin (float):

arrivalRHMin = 80

- arrivalRHMax (float):

arrivalRHMax = 110

- arrivalOroMin (float):

arrivalOroMin = -100

- arrivalOroMax (float):

arrivalOroMax = 12000

- arrivalAltMin (float):

arrivalAltMin = -100

- arrivalAltMax (float):

arrivalAltMax = 12000

- analyzeVapour (boolean):

analyzeVapour = 0

- assignToUptake (boolean):

assignToUptake = 0

- forwardProjectionMode (integer):

forwardProjectionMode = 3

- relativeThreshold (boolean):

relativeThreshold = 1


Parameter set Output

- stepFile (boolean): write parameters on grid and series files for each time step

stepFile = 1

- dayFile (boolean): write parameters on grid and series files averaged/accumulated for each day

dayFile = 1

- monthFile (boolean): write parameters on grid and series files averaged/accumulated for each month

monthFile = 1

- yearFile (boolean): write parameters on grid and series files averaged/accumulated for each year

yearFile = 1

- allFile (boolean): write parameters on grid and series files averaged/accumulated for all time steps

allFile = 1

- staticFields (boolean): write static fields (land-sea mask and topography) onto grid files

staticFields = 1

- saveTraj (integer): write particle trajectories to traj files at each time step (1) or each month (2). Option 0 disables trajectory output.

saveTraj = 0

- skipTraj (boolean): write every nth trajectory to reduce traj file size (0 or 1:disabled, >=2: stride size)

skipTraj = 0

- saveHistogram (boolean): write histogram for selected parameters to a histogram file (0: disabled, 1:enabled)

saveHistogram = 0

- saveMean (boolean): write means, minimum, maximum and standard deviation to mean file. This is duplicate information with the series files but available for historical reasons. The option will be removed in a forthcoming version (0: disabled, 1:enabled).

saveMean = 0


Parameter set Variables

sourcesBoundaryLayer = 1

sourcesFreeTroposphere = 1

evaporationMinusPrecipitation = 1

moistureTransport = 1

trajectoryLocations = 1

precipitationEstimate = 1

sourceLongitude = 1

sourceLatitude = 1

convectionCount = 0

convectionHeight = 0

landFraction = 1

boundaryLayerFraction = 1

freeTroposphereFraction = 1

combinedFraction = 0

transportTime = 1

sourceSkinTemperature = 1

sourceSpecificHumidity = 0

transportDistance = 1

sourceDistance = 1

source2mTemperature = 0

sourceDeuteriumExcess = 1

transportTemperature = 1

transportPressure = 1

condensationTemperature = 1

arrivalTemperature = 1

arrivalPressure = 1

arrival2mTemperature = 0

arrivalSkinTemperature = 1


Parameter set Flexpart

- inputFormat (integer): file format of FLEXPART particle position output files. 0: regional long output format, 1: global analysis data output format, 2: regional short format, 3: global reanalysis data short format

inputFormat = 3

- maxPart (integer): number of particles contained in a single FLEXPART partposit or shortposit file

maxPart = 5000000

- partMass (float): atmospheric mass represented by each particle in kilogramms. Parameter is written out by specific version of FLEXPART to create WaterSip output data.

partMass = 1.01943e+12

- partStride (integer): number of particles to skip during processing to speed up calculations (1: use every particle, >=2: use every 2nd particle, etc).

partStride = 10

- allowReenter (boolean): needs to be enabled for global simulations, and disabled for regional domain-filling runs to avoid double accounting of air parcels (0: disabled, 1: enabled).

allowReenter = 1

Full example for a FLEXPART run input file:

[Case]
caseName = global_201002_final_relativex
inputDir = /Volumes/Data_B/flexpart/global/shortposit_%s
outputDir=/Volumes/Data_B/watersip/global_201002_V3/
startDate = 20100228-180000
endDate = 20100211-000000
timeStep = 6
sectorizeRegion = 0
filterBoxFile = /home/hso039/progs/WaterSip_tool/BOX_FILTERS_SiebenHengste
filterIndex = -1
orographyFile = "/Users/hso039/Library/Mobile Documents/com~apple~CloudDocs/WaterSip_tool/etopo5.nc"
lsmFile = "/Users/hso039/Library/Mobile Documents/com~apple~CloudDocs/WaterSip_tool/ERA_sea_mask_inv.nc"
maskFile = " "
useMask = 0
trajPoints = 41
minTrajPoints = 0
ompThreads = 1
showStats = 0

[Grids]
arrivalGridMinLon = -180
arrivalGridMaxLon = 180
arrivalGridMinLat = -90
arrivalGridMaxLat = 90
arrivalGridDx = 1
arrivalGridDy = 1
arrivalGridRadius = 200
sourceGridMinLon = -180
sourceGridMaxLon = 180
sourceGridMinLat = -90
sourceGridMaxLat = 90
sourceGridDx = 1
sourceGridDy = 1
sourceGridRadius = 200
griddingType = 2

[Diagnostics]
uptakeThreshold = 0.05
precipThreshold = 0.05
blhScale = 1.5
arrivalPrecipMin = 0.05
arrivalPrecipMax = 1.0
arrivalRHMin = 80
arrivalRHMax = 110
arrivalOroMin = -100
arrivalOroMax = 12000
arrivalAltMin = -100
arrivalAltMax = 12000
analyzeVapour = 0
assignToUptake = 0
forwardProjectionMode = 3
relativeThreshold = 1

[Output]
stepFile = 1
dayFile = 1
monthFile = 1
yearFile = 1
allFile = 1
staticFields = 1
saveTraj = 0
skipTraj = 0
saveHistogram = 0
saveMean = 0

[Variables]
sourcesBoundaryLayer = 1
sourcesFreeTroposphere = 1
evaporationMinusPrecipitation = 1
moistureTransport = 1
trajectoryLocations = 1
precipitationEstimate = 1
sourceLongitude = 1
sourceLatitude = 1
convectionCount = 0
convectionHeight = 0
landFraction = 1
boundaryLayerFraction = 1
freeTroposphereFraction = 1
combinedFraction = 0
transportTime = 1
sourceSkinTemperature = 1
sourceSpecificHumidity = 0
transportDistance = 1
sourceDistance = 1
source2mTemperature = 0
sourceDeuteriumExcess = 1
transportTemperature = 1
transportPressure = 1
condensationTemperature = 1
arrivalTemperature = 1
arrivalPressure = 1
arrival2mTemperature = 0
arrivalSkinTemperature = 1

[Flexpart]
inputFormat = 3
maxPart = 5000000
partMass = 1.01943e+12
partStride = 10
allowReenter = 1