Difference between revisions of "CZT-firmware"

(Created page with 'List of included modules in hierachical order: ==Detector module interface (dm_if)== ==MUX (scdp_ch_mux)== ==FIFO== ==DPU interface (dpu_if) == ===xlink_rx=== ===rx register===…')
 
(Detector module interface (dm_if))
Line 2: Line 2:
  
 
==Detector module interface (dm_if)==
 
==Detector module interface (dm_if)==
 +
interface to readout electroncs for the detector modules. Reads
 +
energy, pixel and ASIC address, in addition to multihit information. Also
 +
controls the pipelined ADC.
 +
 
==MUX (scdp_ch_mux)==
 
==MUX (scdp_ch_mux)==
 
==FIFO==
 
==FIFO==

Revision as of 19:35, 18 October 2010

List of included modules in hierachical order:

Detector module interface (dm_if)

interface to readout electroncs for the detector modules. Reads energy, pixel and ASIC address, in addition to multihit information. Also controls the pipelined ADC.

MUX (scdp_ch_mux)

FIFO

DPU interface (dpu_if)

xlink_rx

rx register

xlink_tx

tx register

tx control fsm

Address decoder (adrdec_bgo)

Binning control module (BCM) (bin_ctrl_module)

Scdp channel mux

Bin address generator

Bin access control

Swing buffer

Bin module address arbiter

Memory bus interface (mb_if)

RCU master (rcumaster)

LED control

Memory bus interface (mb_if)

XA config (xa_cfg)

Resync register

Clock reset (clkrst)

Timetag generation (tt_gen)