Cadence Virtuoso overview

From ift
Revision as of 08:01, 6 September 2022 by Are033 (talk | contribs) (→‎Design entry using schematic capture)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

IC design flow using Cadence

We have access to several silicon technologies from different foundries

Design entry using schematic capture

  • Make sure you have set correct library.
  • Make sure you run virtuoso from the same folder as your 'cds.lib'-folder ('~/LIBRARY_VENDOR/')

Virtuoso schematic editor

Simulation

Virtuoso Testbench

Layout

Layout XL and IHP SG13S

Helpful stuff

MikroserverSetup - setup for easy connection to the mikroservers and Cadence Virtuoso

Transistor operating point printer - Script to extract transistor operating point parameters after simulation.

DCoperatingparameters - Guide for showing transistor operating points in the schematic

ADEXL-butterfly-curves - Howto make DC butterfly curves easily.