Difference between revisions of "FOCAL - Forward Calorimeter"

From ift
Jump to: navigation, search
m
Line 6: Line 6:
  
 
== Readout electronics ==
 
== Readout electronics ==
=== First layout ===
+
 
 +
=== Adapterboard ===
 +
The schematics of the board can be found here: [http://web.ift.uib.no/~dominik/files/focal/Adapter.pdf Adapterboard]
 +
 
 +
=== Control and Readout board ===
 +
The idea is to use a Xilinx Virtex 6 development board as a first prototype. The board would run Petalinux, and some software to access the firmware registers. A software framework for the TPC detector is to be adapted for the use on the Xirtex 6 board and Petalinux. The software driver for the message buffer system can be found here:
 +
http://web.ift.uib.no/kjekscgi-bin/viewcvs.cgi/alice-dcs/trunk/rculinux/dcscMsgBufferInterface/
 +
 
 +
The VHDL counterpart is to be found here:
 +
http://web.ift.uib.no/kjekscgi-bin/viewcvs.cgi/alice-fw/trunk/messagebuffer/
 +
 
 +
 
  
 
== Download section ==
 
== Download section ==

Revision as of 14:33, 21 January 2011

This page should contain information about the Focal project, especially about the interfacing from the Mimosa chips to the readout electronics.

Overview

Mimosa chips

Readout electronics

Adapterboard

The schematics of the board can be found here: Adapterboard

Control and Readout board

The idea is to use a Xilinx Virtex 6 development board as a first prototype. The board would run Petalinux, and some software to access the firmware registers. A software framework for the TPC detector is to be adapted for the use on the Xirtex 6 board and Petalinux. The software driver for the message buffer system can be found here: http://web.ift.uib.no/kjekscgi-bin/viewcvs.cgi/alice-dcs/trunk/rculinux/dcscMsgBufferInterface/

The VHDL counterpart is to be found here: http://web.ift.uib.no/kjekscgi-bin/viewcvs.cgi/alice-fw/trunk/messagebuffer/


Download section