FreeRTOS FSBL: Difference between revisions

From ift
(Created page with "Tested on Xilinx Vivado/SDK 2017.3, Ubuntu 16.04 LTS. This tutorial assumes you have completed the "Creating example project with AXI4 Lite peripheral in Xilinx Vivado"-t...")
 
No edit summary
 
(8 intermediate revisions by the same user not shown)
Line 1: Line 1:
Tested on Xilinx Vivado/SDK 2017.3, Ubuntu 16.04 LTS.
Tested on Xilinx Vivado/SDK 2017.3, Ubuntu 16.04 LTS.


This tutorial assumes you have completed the "[[Creating example project with AXI4 Lite peripheral in Xilinx Vivado]]"-tutorial.
This tutorial assumes you have completed the "[[Running FreeRTOS on Xilinx Zybo]]"-tutorial.


===== Exporting hardware bitstream =====
 
===== Creating FSBL =====
 
The result from the previous tutorial linked at the top of this tutorial, should be a Project Explorer looking like this:
[[File:project_explorer_start.png|400px|center]]<br />
 
Goto ''File --> New --> Application Project''. Name the new project "FSBL" and let OS platform be "standalone". On the next page, choose the "Zynq FSBL"-template. Finish.
The Project Explorer should now contain the following:
[[File:fsbl_created.png|400px|center]]<br />
 
Goto ''Xilinx --> Create Boot Image''. Choose the Zynq architecture and click to browse for a Output BIF file path. Name the file "output.bif" and create a folder called "output" within the axi4_lite_tutorial_project.sdk directory. Click OK.
Check that the output format is "BIN". Now click add in the Boot Image Partitions section:
 
Choose "Bootloader" as partition type, and navigate to the file "FSBL.elf" under \axi4_lite_tutorial_project.sdk\FSBL\Debug\ in the file path.<br />
Now add a new partition, this time as type "datafile". The file that should be added to file path is "design_1_wrapper.bit" under \axi4_lite_tutorial_project.runs\impl_1\<br />
The third and final partition is of type "datafile", has the name "FreeRTOS_example_project.elf", and is found at \axi4_lite_tutorial_project.sdk\FreeRTOS_example_project\Debug\<br />
<br />
When all partitions have been added, click "Create Image". Navigate to the directory you specified for output, in our case \axi4_lite_tutorial_project.sdk\output.
It should now contain two files: BOOT.bin, and output.bif. Copy the BOOT.bin file onto an SD-card formatted as FAT.
 
Bring up your favorite Xilinx Zybo SoC board, and configure jumper 5 (JP5) for SD boot configuration. Insert the SD card, and connect a power source (wall or USB). Then power up the board. After a couple of seconds, it should behave just as it did when booting from JTAG in the "[[Running FreeRTOS on Xilinx Zybo]]"-tutorial.

Latest revision as of 18:23, 6 December 2017

Tested on Xilinx Vivado/SDK 2017.3, Ubuntu 16.04 LTS.

This tutorial assumes you have completed the "Running FreeRTOS on Xilinx Zybo"-tutorial.


Creating FSBL

The result from the previous tutorial linked at the top of this tutorial, should be a Project Explorer looking like this:

Project explorer start.png


Goto File --> New --> Application Project. Name the new project "FSBL" and let OS platform be "standalone". On the next page, choose the "Zynq FSBL"-template. Finish. The Project Explorer should now contain the following:

Fsbl created.png


Goto Xilinx --> Create Boot Image. Choose the Zynq architecture and click to browse for a Output BIF file path. Name the file "output.bif" and create a folder called "output" within the axi4_lite_tutorial_project.sdk directory. Click OK. Check that the output format is "BIN". Now click add in the Boot Image Partitions section:

Choose "Bootloader" as partition type, and navigate to the file "FSBL.elf" under \axi4_lite_tutorial_project.sdk\FSBL\Debug\ in the file path.
Now add a new partition, this time as type "datafile". The file that should be added to file path is "design_1_wrapper.bit" under \axi4_lite_tutorial_project.runs\impl_1\
The third and final partition is of type "datafile", has the name "FreeRTOS_example_project.elf", and is found at \axi4_lite_tutorial_project.sdk\FreeRTOS_example_project\Debug\

When all partitions have been added, click "Create Image". Navigate to the directory you specified for output, in our case \axi4_lite_tutorial_project.sdk\output. It should now contain two files: BOOT.bin, and output.bif. Copy the BOOT.bin file onto an SD-card formatted as FAT.

Bring up your favorite Xilinx Zybo SoC board, and configure jumper 5 (JP5) for SD boot configuration. Insert the SD card, and connect a power source (wall or USB). Then power up the board. After a couple of seconds, it should behave just as it did when booting from JTAG in the "Running FreeRTOS on Xilinx Zybo"-tutorial.