Get readout box up and running: Difference between revisions
(Created page with '- Use Impact to configure FPGA(s) - start TFTP server - Use XMD: <pre> $ connect mb mdm -debugdevice devicenr 4 $ dow u-boot.elf </pre> Open serial console <pre> $ tftp </pre> …') |
(No difference)
|
Revision as of 07:57, 18 January 2012
- Use Impact to configure FPGA(s) - start TFTP server - Use XMD:
$ connect mb mdm -debugdevice devicenr 4 $ dow u-boot.elf
Open serial console
$ tftp
Boot Linux kernel:
$ bootm
Adjust MAC address and load startup script:
$ ifconfig eth0 hw ether 00:0a:35:02:4b:a8 $ udhcpc $ /home/test/load.sh