Get readout box up and running: Difference between revisions

Revision as of 15:05, 2 February 2012

How-TO

How-To

- Use XMD:

$ connect mb mdm -debugdevice devicenr 4
$ dow u-boot.elf

Open serial console

$ tftp

Boot Linux kernel:

$ bootm

Adjust MAC address and load startup script:

$ ifconfig eth0 hw ether 00:0a:35:02:4b:a8
$ udhcpc
$ /home/test/load.sh

@@ Line 1: / Line 1: @@
-*Hardware requirements*
+===Overview===
-* Focal read-out box
-* Computer with Gb network capability
-* One or more patch panels PCBs
-* One or more flex PCBs with mounted MIMOS ASICs
+==Hardware requirements==
+*Focal read-out box
+*Computer with Gb network capability
+*One or more patch panels PCBs
+*One or more flex PCBs with mounted MIMOS ASICs
-*Software requirements and drivers*
+==Software requirements and drivers==
+==Using Xilinx Impact to configure FPGA(s)==
+How-TO
+==Configure TFTP server==
+How-To
-- Use Impact to configure FPGA(s)
-- start TFTP server
 - Use XMD:
-<pre>
+ $ connect mb mdm -debugdevice devicenr 4
-$ connect mb mdm -debugdevice devicenr 4
+ $ dow u-boot.elf
-$ dow u-boot.elf
-</pre>
 Open serial console