Get readout box up and running: Difference between revisions
(Created page with '- Use Impact to configure FPGA(s) - start TFTP server - Use XMD: <pre> $ connect mb mdm -debugdevice devicenr 4 $ dow u-boot.elf </pre> Open serial console <pre> $ tftp </pre> …') |
mNo edit summary |
||
Line 1: | Line 1: | ||
*Hardware requirements* | |||
* Focal read-out box | |||
* Computer with Gb network capability | |||
* One or more patch panels PCBs | |||
* One or more flex PCBs with mounted MIMOS ASICs | |||
*Software requirements and drivers* | |||
- Use Impact to configure FPGA(s) | - Use Impact to configure FPGA(s) | ||
- start TFTP server | - start TFTP server |
Revision as of 14:59, 2 February 2012
- Hardware requirements*
- Focal read-out box
- Computer with Gb network capability
- One or more patch panels PCBs
- One or more flex PCBs with mounted MIMOS ASICs
- Software requirements and drivers*
- Use Impact to configure FPGA(s)
- start TFTP server
- Use XMD:
$ connect mb mdm -debugdevice devicenr 4 $ dow u-boot.elf
Open serial console
$ tftp
Boot Linux kernel:
$ bootm
Adjust MAC address and load startup script:
$ ifconfig eth0 hw ether 00:0a:35:02:4b:a8 $ udhcpc $ /home/test/load.sh