Get readout box up and running

• Hardware requirements*
• Focal read-out box
• Computer with Gb network capability
• One or more patch panels PCBs
• One or more flex PCBs with mounted MIMOS ASICs

• Software requirements and drivers*

- Use Impact to configure FPGA(s) - start TFTP server - Use XMD:

$ connect mb mdm -debugdevice devicenr 4
$ dow u-boot.elf

Open serial console

$ tftp

Boot Linux kernel:

$ bootm

Adjust MAC address and load startup script:

$ ifconfig eth0 hw ether 00:0a:35:02:4b:a8
$ udhcpc
$ /home/test/load.sh