Get readout box up and running: Difference between revisions

From ift
mNo edit summary
mNo edit summary
Line 1: Line 1:
===Overview===
==Overview==


==Hardware requirements==
==Hardware requirements==
Line 11: Line 11:




==Using Xilinx Impact to configure FPGA(s)==
==Configure the FPGA(s)==
 
===Using XMD===
 
How-to
 
===Using Impact===


How-TO
How-TO
Line 19: Line 25:
How-To
How-To


 
==Connect to debug module on Processor Bus==
- Use XMD:
- Use XMD:
  $ connect mb mdm -debugdevice devicenr 4
  $ connect mb mdm -debugdevice devicenr 4
Line 25: Line 31:


Open serial console
Open serial console
<pre>
$ tftp
$ tftp
</pre>


Boot Linux kernel:
Boot Linux kernel:
Line 40: Line 44:
$ /home/test/load.sh
$ /home/test/load.sh
</pre>
</pre>
- Use XMD:
$ connect mb mdm -debugdevice devicenr 4
$ dow u-boot.elf

Revision as of 15:11, 2 February 2012

Overview

Hardware requirements

  • Focal read-out box
  • Computer with Gb network capability
  • One or more patch panels PCBs
  • One or more flex PCBs with mounted MIMOS ASICs


Software requirements and drivers

Configure the FPGA(s)

Using XMD

How-to

Using Impact

How-TO

Configure TFTP server

How-To

Connect to debug module on Processor Bus

- Use XMD:

$ connect mb mdm -debugdevice devicenr 4
$ dow u-boot.elf

Open serial console

$ tftp

Boot Linux kernel:

$ bootm

Adjust MAC address and load startup script:

$ ifconfig eth0 hw ether 00:0a:35:02:4b:a8
$ udhcpc
$ /home/test/load.sh

- Use XMD:

$ connect mb mdm -debugdevice devicenr 4
$ dow u-boot.elf