Difference between revisions of "IHP 130nm process"

m
m
Line 21: Line 21:
 
To avoid having to do this every time try to set up your environment like described in [[MikroserverSetup]]
 
To avoid having to do this every time try to set up your environment like described in [[MikroserverSetup]]
  
Follow the Design Kit User manual found in the menu SG13S Features > Design Kit Documentation. Make sure that your web browser is closed or started from the microserver, else the file will not be found.
+
= Before starting layout =
 +
 
 +
Read the Design Kit User Guide. It can be found on the SG13SFeatures tab on the Virtuoso console window, or in the folder "/eda/design_kits/ihp_sg13/SG13S_618_rev1.12.0/doc/pdf/" on the mikroserver. Make sure that your web browser is closed or started from the mikroserver, else the file will not be found.
 +
 
 +
Other documents are found in "eda/design_kits/ihp_sg13/SG13S_618_rev1.12.0/doc/html/"
 +
 
  
 
[[Category:Mikroelektronikk]] [[Category:Integrated_Circuts]] [[Category:Cadence_Virtuoso]]
 
[[Category:Mikroelektronikk]] [[Category:Integrated_Circuts]] [[Category:Cadence_Virtuoso]]

Revision as of 11:20, 15 October 2020

Cadence design with IHP 130nm process

Starting up the IHP SG13S Design Kit

The following steps describe how to install the Process Design Kit and start a new design.

Log on to the mikroserver:

ssh -X mikroserver4

The preferred shell is bash. When using another shell it will be necessary to change the installation routine and modify the initialization script accordingly.

The first time you are using the IHP design kit you should copy the user environment design to your chosen parent directory (e.g ~/ihp)

cp -rp /eda/design_kits/ihp_sg13/SG13S_618_rev1.12.0/work/skel ~/ihp

Change sh.cadence in ~/ihp/cds to suit your needs. In particular you must define $IHP_TECH and $PROJECT according to your local environment. Then set general and user Cadence environment variables by doing:

source /eda/cadence/2019-20/scripts/analog.sh
cd ~/ihp/cds/
source /eda/design_kits/ihp_sg13/sh.cadence
virtuoso &

To avoid having to do this every time try to set up your environment like described in MikroserverSetup

Before starting layout

Read the Design Kit User Guide. It can be found on the SG13SFeatures tab on the Virtuoso console window, or in the folder "/eda/design_kits/ihp_sg13/SG13S_618_rev1.12.0/doc/pdf/" on the mikroserver. Make sure that your web browser is closed or started from the mikroserver, else the file will not be found.

Other documents are found in "eda/design_kits/ihp_sg13/SG13S_618_rev1.12.0/doc/html/"