Difference between revisions of "IHP 130nm process"

m (Specified mikroserver2 or mikroserver3 (1 does not work atm))
m (Removed uneccesary bash alias and linked to the setup page instead.)
Line 19: Line 19:
 
  virtuoso &
 
  virtuoso &
  
To create a command that will do this for you try this command:
+
To avoid having to do this every time try to set up your environment like described in [[MikroserverSetup]]
  echo "alias startVirtuoso='source /eda/cadence/2016-17/scripts/analog_flow.sh && cd ~/ihp/cds/ && source sh.cadence && virtuoso &'" >> ~/.bashrc
 
Typing 'startVirtuoso' in the terminal will execute these four commands 
 
  
  
Line 27: Line 25:
 
Follow the Design Kit User manual found in the menu SG13S Features > Design Kit Documentation. Make sure that your web browser is closed or started from the microserver, else the file will not be found.
 
Follow the Design Kit User manual found in the menu SG13S Features > Design Kit Documentation. Make sure that your web browser is closed or started from the microserver, else the file will not be found.
  
[[Category:Mikroelektronikk]] [[Category:Integrated_Circuts]]
+
[[Category:Mikroelektronikk]] [[Category:Integrated_Circuts]] [[Category:Cadence_Virtuoso]]

Revision as of 16:19, 30 October 2017

Cadence design with IHP 130nm process

Starting up the IHP SG13S Design Kit

The following steps describe how to install the Process Design Kit and start a new design.

Log on to server (mikroserver2 or mikroserver3):

ssh -X mikroserver2

The preferred shell is bash. When using another shell it will be necessary to change the installation routine and modify the initialization script accordingly.

The first time you are using the IHP design kit you should copy the user environment design to your chosen parent directory (e.g ~/ihp)

cp -rp  /eda/design_kits/ihp_sg13/SG13S_616_rev1.5.0_a/work/skel ~/ihp

Change sh.cadence in ~/ihp/cds to suit your needs. In particular you must define $IHP_TECH and $PROJECT according to your local environment. Then set general and user Cadence environment variables by doing:

source /eda/cadence/2016-17/scripts/analog_flow.sh
cd ~/ihp/cds/
source sh.cadence
virtuoso &

To avoid having to do this every time try to set up your environment like described in MikroserverSetup


Follow the Design Kit User manual found in the menu SG13S Features > Design Kit Documentation. Make sure that your web browser is closed or started from the microserver, else the file will not be found.