Phys117 - PET project: Difference between revisions

From ift
(added new files)
 
Line 1: Line 1:
== Goal ==
== Goal ==
The aim of this phys117 course is to build a small array with 9 crystals coupled to silicon photo multipliers. For this we need to design the circuit to read out the MPPCs and include a pre amplifier there. We also need to have a light tight containment that holds the crystals and couples them to the MPPCs. To measure the physical crosstalk the crystals have to be individually wrapped. The readout of the whole system is then done in Labview through two 14 bit 2 Ghz oversampling CAEN ADCs.
The aim of this phys117 course is to build a small array with 9 crystals coupled to silicon photo multipliers. For this we need to design the circuit to read out the MPPCs and include a pre amplifier there. We also need to have a light tight containment that holds the crystals and couples them to the MPPCs. To measure the physical crosstalk the crystals have to be individually wrapped. The readout of the whole system is then done in Labview through two 14 bit 2 Ghz oversampling CAEN ADCs.
The hardware has been built in autumn 2010, and the next task is to perform a the measurements: energy resolution, linearity and event topology.


== Resources ==
== Resources ==
[http://web.ift.uib.no/~dominik/files/phys117/PHYS117%20-%20PET%20scanner.pdf Project report of phys117 fall 2010]<br>
[http://web.ift.uib.no/~dominik/files/phys117/MPPC%20Amplifier%209%20routed2.brd Eagle board layout of 3x3 matrix]<br>
[http://web.ift.uib.no/~dominik/files/phys117/MPPC%20Amplifier%209%20routed2.sch Eagle schematics file of 3x3 layout]<br>
[http://web.ift.uib.no/~dominik/files/phys117/MPPC%20Amplifier.zip Eagle schematics and layout]<br>
[http://web.ift.uib.no/~dominik/files/phys117/MPPC%20Amplifier.zip Eagle schematics and layout]<br>
[http://web.ift.uib.no/~dominik/files/phys117/Multisim.zip Multisim simulation model]<br>
[http://web.ift.uib.no/~dominik/files/phys117/Multisim.zip Multisim simulation model]<br>
[http://www.farnell.com/datasheets/92509.pdf AD8000YDZ preamp datasheet]<br>
[http://www.farnell.com/datasheets/92509.pdf AD8000YDZ preamp datasheet]<br>

Latest revision as of 09:51, 5 January 2011

Goal

The aim of this phys117 course is to build a small array with 9 crystals coupled to silicon photo multipliers. For this we need to design the circuit to read out the MPPCs and include a pre amplifier there. We also need to have a light tight containment that holds the crystals and couples them to the MPPCs. To measure the physical crosstalk the crystals have to be individually wrapped. The readout of the whole system is then done in Labview through two 14 bit 2 Ghz oversampling CAEN ADCs.

The hardware has been built in autumn 2010, and the next task is to perform a the measurements: energy resolution, linearity and event topology.


Resources

Project report of phys117 fall 2010
Eagle board layout of 3x3 matrix
Eagle schematics file of 3x3 layout


Eagle schematics and layout
Multisim simulation model
AD8000YDZ preamp datasheet