RCU2 Software Development Firmware: Difference between revisions
(Initilized page) |
No edit summary |
||
| Line 1: | Line 1: | ||
== | == Programming == | ||
A FlashPro project including a STAPL programming file with firmware and u-boot images can be found [http://tidsreise.com/rcu/rcu2_linux_fw.zip here]. | |||
The firmware is compiled for the SmartFusion2 Starter Kit | |||
Usage: | |||
# Open FlashPro software | |||
# Select ''Open Project'' and find the file ''rcu2_linux_fw.pro'' | |||
# Make sure the FlashPro programmer is inserted and that it has been selected by pressing ''View Programmers''. If necessary, hit ''Refresh/Rescan for Programmers'' | |||
# Now hit ''PROGRAM'', wait for it to finish and then power cycle the board. | |||
... | |||
Revision as of 17:16, 27 November 2013
Programming
A FlashPro project including a STAPL programming file with firmware and u-boot images can be found here. The firmware is compiled for the SmartFusion2 Starter Kit Usage:
- Open FlashPro software
- Select Open Project and find the file rcu2_linux_fw.pro
- Make sure the FlashPro programmer is inserted and that it has been selected by pressing View Programmers. If necessary, hit Refresh/Rescan for Programmers
- Now hit PROGRAM, wait for it to finish and then power cycle the board.
...