RCU2 Software Development Firmware

From ift
Revision as of 17:16, 27 November 2013 by Lbr088 (talk | contribs)

Programming

A FlashPro project including a STAPL programming file with firmware and u-boot images can be found here. The firmware is compiled for the SmartFusion2 Starter Kit Usage:

  1. Open FlashPro software
  2. Select Open Project and find the file rcu2_linux_fw.pro
  3. Make sure the FlashPro programmer is inserted and that it has been selected by pressing View Programmers. If necessary, hit Refresh/Rescan for Programmers
  4. Now hit PROGRAM, wait for it to finish and then power cycle the board.
...