- 1 SAMPA MPW1 documentation
- 2 SAMPA DAQ Board Firmware and Software
SAMPA MPW1 documentation
This page has moved to https://twiki.cern.ch/twiki/bin/view/ALICE/SAMPA
SAMPA DAQ Board Firmware and Software
Source Code Repositories
See SAMPA Registers for latest updated information on SAMPA registers.
See SAMPA DAQ Registers for latest updated information on SAMPA DAQ registers.
Compiled DAQ Firmware and Software Versions
The version is the same as the SVN version it was compiled from
All latest files
Added basic run control to communicator and firmware. A set number of packets can be acquired. Fixed twos complement to ones complement conversion for ADC. System upgraded for Quartus 14.1 Kernel updated to 3.16
Added status register for ADC pins and a register for the version of the running sampa_server. Added root file generation for the analyser.
Fixed readout. Use SD Card from rev42 and add sampa_server.
To set a fixed mac: Connect to terminal, warm reboot (key 6), press key in terminal to stop at uboot, type
setenv ethaddr '7e:a5:87:ec:06:03' saveenv boot
Root compile problem
LNK1123: failure during conversion to COFF Install VS2010 SP1